TAKI PUMP Model HD
FLELDS OF APPLICATION
- Paint and lacquer Industry e.g. solvents, binders, pigmented goods, textile dye.
- Sugar Industry e.g. molasses, syrup.
- Petro chemical Industry e.g. asphalt, bitumen, liquid polymerlcs, emollients, Solvents, emulslons, glue filling paste.
- Oil industry e.g. oil, oil products, grease, additives.
- Chemical Industry e.g. bases, weak acids, soap, soya oil, freon.
- Paper Industry e.g. sulphate soap, tall oil, water glass.
- Fish Industry e.g. fish oil, press water, solubles.
- Food Industry e.g. chocolate, yeast mayonnaise, brine, liquo rice vinegar, egg yolk.
ADVANTAGES
- Pumps difficult liquids
- Viscosities up to 75.000 cSt.
- Non-lubricating as well as lubricating liquids
- With contents of abrasives
- Self priming with large suction capability
- Self priming up to a vacuum of 60 kPa ( 18 inches Hg)
- Max. operating vacuum of 90 kPa ( 27 inches Hg)
- Reversible pumping function
- Efficient two way pumping which allows emptying of the discharge pipe after the pumping operation
- Gentle liquid handling
- Does not stir the liquid
- No pressure pulsations
- Long life
- Robust, uncomplicated construction with outrigger ball bearing support.
- Only two rotating parts and one shaft seal.
- Low rotating speed.
- Capable of short time dry operation.
- Can be fitted with relief valve.
- Ensures that no damage occurs on pump or pipes if the pipe line is blocked.
- Easy to inspect and maintain.
- Front cover and bearing support can easily be dismantled for inspection of rotating parts without dismounting pipe connections or power unit.
- Axial readjustment of rotor and shaft.
The TAKI HD type pump is a gear pump with an internal idler gear meshing a main power rotor. This construction provides more favourable flow conditions than those obtained in other types of gear pump. The direction of liquid flow is changed only slightly through the pump. Thus large selfpriming ability and gentle liquid handling are achieved, and also high viscous liquids may be pumped.